The Argyll Smock slip-on jacket is inspired by the traditional clothing of a Scottish deer hunter. The jacket has a loose cut, so there is no problem with wearing it over a thicker layer of clothes. When designing it, the main consideration was the practicality in use. The whole thing is made of brushed tricot, which in practice is a polyester material. Therefore, Argyll Smock is waterproof up to 10,000 mm. An additional advantage is the breathability of the jacket, which is around 5000 g / m2 * 24h.
The detachable hood with a visor is a convenient solution on sunny days, but during rain it becomes invaluable. The jacket has 4 pockets: 2 at the top in a crossover style with waterproof zippers and 2 at the bottom. The inner cuffs are made of neoprene. If necessary, you can adjust the whole to your figure, thanks to the drawcords located in the hood, waist and outer cuffs.
|Size||Total length (cm/in)||Chest circumference (cm/in)||Sleeve lenght - armpit to cuff (cm/in)|
|S||85 cm (33,5")||116 cm (45,7")||58 cm (22,8")|
|M||88 cm (34,6")||120 cm (47,2")||58 cm (22,8")|
|L||90 cm (35,4")||124 cm (48,8")||60 cm (23,6")|
|XL||94 cm (37")||126 cm (49,6")||62 cm (24,4")|
|XXL||96 cm (37,8")||134 cm (52,8")||64 cm (25,2")|
|3XL||99 cm (39")||140 cm (55,1")||66 cm (26")|
INSTRUCTIONS: HOW TO MEASURE
Please read the following instructions to be sure you buy a product that will fit well.
Place a garment that fits you well on a flat, even surface (e.g. table, floor, bed) and take its measurements.
Remember to measure without stretching the material!
1. Total length
Place the garment facing surface and measure the length in a straight line from collar seam to the bottom of the measured item.
2. Chest measurements
Place the back of the garment on the surface and measure the width between the seams in the armpits. Multiply this value twice to get the chest measurements.
3. Sleeve length from armpit
Place the back of the garment on the surface and measure the length from the armpit seam to the end of the sleeve cuff.
What if you are between two sizes? It's easy. If you prefer more fitted clothes, choose a smaller size. If you prefer to be a little looser, go for the larger size.
THE TOLERANCE FOR THE DIMENSIONS GIVEN IN THE TABLE IS +/- 2 CM.